Night Vision Series

Traditional metallized films reflect equally both inside and outside, becoming mirror-like at night. With Night Vision films, you get to enjoy privacy in the daytime, while still being able to look through the film at night.

Night Vision window films help block the sun’s damaging UV rays, reduce glare and reject up to 72% of the sun’s heat. These darker shaded films are designed to reject solar heat that is produced from visible light, while providing significant glare relief. They allow 15% to 35% of the natural light into your home.



  • Great heat rejection helps provide energy savings and improved comfort
  • Improved privacy during the day and maintaining a clear view at night due to low reflectivity film properties
  • Helps reduce glare and eye discomfort
  • Helps extend the life of furnishings by significantly reducing harmful UV rays, the largest cause of fading
  • Excellent scratch resistant coating
  • 3M nanotechnology enhances colour stability
  • Comprehensive warranty from 3M up to 10 years

Night Vision Series (NV15) Sample Card

Visible Light Transmitted 15%
UV Rejected 99%
Infrared Rejected 83%
Total Solar Energy Rejected 72%
Glare Reduction 83%

 

Performance data applies to a typical film on 6mm clear glass using applicable industry test methods and standards.

Download sample card

Night Vision Series (NV25)

Visible Light Transmitted 24%
UV Rejected 99%
Infrared Rejected 70%
Total Solar Energy Rejected 61%
Glare Reduction 73%

 

Performance data applies to a typical film on 6mm clear glass using applicable industry test methods and standards.

Download sample card

Night Vision Series (NV35)

Visible Light Transmitted 36%
UV Rejected 99%
Infrared Rejected 62%
Total Solar Energy Rejected 52%
Glare Reduction 59%

 

Performance data applies to a typical film on 6mm clear glass using applicable industry test methods and standards.

Download sample card

These are the key reasons why you should choose 3M window films over other brands:

  • 3M is the pioneer of the solar film industry and owns the patent for window films in 1966.
  • The film adhesive is durable and easy to clean when removed
  • Credible and globally renowned company
  • Direct 3M manufacturer’s warranty
  • 3M is the only manufacturer whose warranty covers corrosion for reflective films
  • Longest warranty period issued (applies to Prestige Series films only)
  • Abundance of test reports and products specifications widely available (offline and online)

Sun control films address three issues that we generally face in a tropical country like Singapore, which are glare, heat and harmful ultraviolet (UV) rays. 3M has different types of sun control films that cater to your different needs.

All 3M Sun Control Window Films are made in the United States.

Firstly, you can refer the International Window Film Associations (IWFA) website for a list of window film manufacturers. 3M is one of them.

 

Secondly, you can also refer to the National Fenestration Rating Council (NFRC) website to check the availability of the window film models offered by other brands. The National Fenestration Rating Council (NFRC) is a US-based non-profit organization which administers the only uniform, independent rating and labelling system for the energy performance of windows, doors, skylights, and attachment products (e.g. window films). You can find the 3M window film types that we carry (e.g. Prestige, Night Vision and Neutral Series films) on this website. Their product specifications and performance are the same as stated in our brochures.

 

We are also able to present to you the 3M manufacturer’s certificate upon request for further verification.

Glass is a good insulator of heat. The thicker the glass panel, the greater the amount of heat trapped.

 

The majority of our window panels these days are either 6mm to 8mm thick. However, some brands list their films’ performance specifications based on a 3mm thick glass, which creates a false impression that the film is able to achieve a higher total solar energy rejection than 3M’s. There are also brands which do not indicate the thickness of the glass used in their performance tests.

 

Unlike our competitors, 3M has an abundance of specifications indicated (e.g. film performance on a single pane clear glass of 6mm versus film performance on a single pane tinted glass of 6mm). See below for example.

The average consumer equates ‘IR’ with heat mainly because of infrared heaters and lamps but this does not accurately represent the composition of energy from the sun.

 

Infrared rays represent about 53% of the solar energy. The rest of the sun’s energy comes from visible light (44%) and a small portion from ultraviolet (UV) light (3%). All of these 3 areas make up what is known as the solar spectrum and their combined energy is what we refer to when we use the term total solar energy. Hence, these parts of the solar spectrum also contribute about half of what turns into heat in a room.

 

Therefore, when making claims about heat rejection, we should be looking at Total Solar Energy (UV + visible + IR).

Total Solar Energy Rejected (TSER) is a metric that describes the total amount of solar energy (UV + visible + IR) that is blocked, or rejected, from passing through the window.

 

The IR rejection number only helps people to understand that the film is rejecting the vast majority of the heat from the infrared. It does not mean that if a large portion of the IR is blocked then almost no heat will be transmitted through a film.

No. It does not make it a better performing film as a film with a high TSER (Total Solar Energy Rejected) could also be much darker or highly reflective. So the best way to assess between films is to compare films with the same VLT (visible light transmission).

Yes, you can get a pretty good idea of the VLT simply by looking at how dark the film makes the window. Simply put, VLT is the total amount of the visible light that makes it through your filmed window.

Film Model List Price Suitable Development Types Film Warranty

(For fixed, sliding, top hung panels)

Film Warranty

(For casement panels)

Film Type
Prestige $16 psf HDB, DBSS, Executive Condo (EC), Condo, Landed Property 15 years 3 years Multi-layered
Ceramic $10 psf HDB, DBSS, EC, Condo, Landed Property 10 years 3 years Ceramic coating
Night Vision $9 psf HDB, DBSS, Landed Property 10 years 3 years Reflective

(Metallic)

Colour Stable $7 psf HDB, DBSS, Landed Property 5 years 3 years Dyed

The film warranty covers bubbling, shrinkage, delamination, discolouration, and corrosion (metallic films).

Our films are designed to be applied onto the interior of window panels. The adhesive side of the film has a UV protection coating that protects the film from degrading, hence there is a very minimal chance of bubbling and delamination due to UV exposure.

 

The interior side of the film has no UV coating. Unlike fixed, sliding and top hung window panels, casement panels can be swung outwards and the interior of window panels will be exposed to outdoor elements. Hence wear and tear is even faster.

 

If you prefer a longer warranty period for your casement panels, you can opt for the exterior film. We do have exterior films for our Prestige and Reflective Sun Control Films.

Fret not, there are no hacking, drilling or noise involved in the installation of window films. It would be a wet application.  Our installers will wash the glass panels with shampoo solution to removing stains and dirt marks before applying the films. However you are still required to clean your window prior to the installation as we would need to ss reduce the amount of dust and dirt significantly.

 

The installation of the sun control films should only be carried out after all major renovations work are completed (hacking and drilling) and before any curtains/blinds/grilles installation.

 

The condition of the site has to be clean and minimally dust free for installation so as to minimise the chances of dirt trapped bubbles on the film.

Do not apply any pressure or touch the films for a week after installation. The film requires at least 4 to 6 weeks to fully dry and “sit” into position.

A micro-fibre cloth and water is sufficient. We do not recommend using glass clean solutions and newspapers to clean your windows.